Excellent for skim coating
Best-in-class for embedding tape
Superior filling and finishing
GREENGUARD Gold certified and qualifies as a low VOC emitting material (CDPH Standard
Method V1.1, also known as CA Section 01350)
Sheetrock is a trademarked name owned by the United States Gypsum Corporation. USG Corporation, also known as United States Gypsum Corporation, is an American company that manufactures construction materials, most notably drywall and joint compound.
Joint compound is used to finish gypsum panel joints, corner bead, trim and fasteners, as well as skim coating. In addition, it is also very handy for fixing minor blemishes or damages to walls.
Cover joint with a thin layer of compound and embed paper tape, leaving about 1/32 in. of the compound under the feathered edge. Let dry. Apply second coat, feathering approximately 2 in. beyond the first coat. Let dry, then dry trowel/scrape or sand lightly to remove tool marks as required, and then apply a third coat, feathering 2 in. beyond the second coat. Sand lightly as required when dry. Finish fastener heads, corner bead, and inside corners as required with at least three coats of joint compound, feathered out onto panel faces, and finished to a smooth surface.