Product Overview:
It is a high-quality product that ensures a strong bond between the tiles and the surface, making it ideal for both indoor and outdoor applications. Benefits: - Weather resistance: This adhesive is designed to withstand various weather conditions, making it suitable for both indoor and outdoor applications. - High bond strength: The adhesive ensures a strong bond between the tiles and the surface, reducing the risk of tiles becoming loose over time.
Manfacturer Overview:
In 1981, Saudi VETONIT Co. Ltd. (SAVETO) was established as a Saudi European JV, in partnership with the leading manufacturers of building finishing materials and specialty chemicals in northern Europe. In 1991, Rashed Al Rashed Group assumed full ownership of SAVETO, becoming the first Saudi Company to offer a full range of advanced construction chemicals and building materials to the Middle East and North Africa markets (MENA region) under SAVETO & VETONIT brands.
Product Usage:
The adhesive is easy to mix and apply, reducing the time and effort required for installation. - Versatile: The adhesive is suitable for use with a wide range of ceramic tiles, making it a versatile choice for any project. The adhesive is suitable for use on a wide range of surfaces, including concrete, brick, and existing tiles.
It is recommended to mix the adhesive with water before use and to apply it in a thin, even layer. The tiles should be pressed firmly into the adhesive and allowed to dry for the recommended time before grouting.
Tips:
- Use the mixed material within 2 hours.
- The substrate should be sound and clean.
- Remove the hardened material using mechanical means.
- Clean tools and equipment with water immediately after use.
- Allow the installed tiles to remain undisturbed for at least 48 hours.
- Do not add water to the mixture once the mortar adhesive starts to harden.
- Mortar adhesive must not rise between the tile joints higher than halfway the thickness of the tiles.
- Allow the mixed material to stand for about 10 minutes and remix briefly without adding further water.
- For mixing use a low- speed electric drill fitted with a suitable paddle until achieving a uniform, lump-free consistency.
- Wet all surfaces (except gypsum board) with clean water before Ceramic Tile Fix application. The surface should appear damp with no water pooling.